You have no items in your shopping cart.
Details
The Fujikura 70S is a fully robust, core alignment fusion splicer, providing consistent, low loss, splice performance.
The new design streamlines the steps required to complete splices, resulting in greater productivity. 'Configurable automation' features allow you to customise the operation of the machine to best suit your particular splicing technique and process.
A new programmable 'automatic wind protector' closes and begins the splicing process after clamping the fibres in position or pressing the 'set' button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibres fast and easy!
The 70S is the latest addition to Fujikura's fusion splicer range and has been specifically designed to be more ergonomic, faster and have greater durability than the 60S, reducing splicing time to just seven seconds.
The rugged construction design adds improved reliability by resisting shock, rain and dust, allowing it to withstand a 30 inch drop test. Two of the newest features include an automated wind protector and a tube heater which has been developed for quicker splicing cycles and to reduce the number of operational steps. The unit also includes a high-resolution LCD monitor, powerful Li-ion battery for longer operation time and built in videos for on-the-go training
• Automated and programmable wind protector
• 9-second automated tube heater
• Fully robust for shock, dust and moisture
• Li-Ion battery with 200 splices/shrinks per charge
• 5 mm cleave length for splice on connector or small package needs
• Sheath clamp or fibre holder operation
• On-board training and support videos
• Internet software upgrades
• Multi-function transit case with integrated workstation
Specification:
Applicable fibres |
SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), |
Fibre Count |
Single |
Cladding diameter |
80 to 150μm |
Coating diameter |
100 to 1000μm |
Fibre cleaved length |
5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900 |
Actual average splice loss |
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. |
Splice time |
7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode |
Return loss |
60dB or greater |
Splicing modes |
100 splicer modes are available |
Splice loss estimate |
Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate. |
Attenuation splice function |
Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an |
Storage of splice result |
The last 2000 results to be stored in the internal memory. |
Magnification |
X / Y (300X magnification), or both X and Y simultaneously (160X magnification) |
Viewing method |
By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor |
Tension test |
1.96 to 2.25N |
Operating condition |
0-5000m above sea level, 0-95% RH and -10 to 50°C respectively. |
Tube heater |
Built-in auto-start tube heater with 10 heating modes and up to 20 for reference |
Tube heat time |
13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available |
Applicable protection |
60mm, 40mm and a series of micro sleeves. |
No. of splice/heating |
200 times of splicing and heat shrinking under with BTR-09 |
Power supply |
Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09 |
Terminals |
USB2.0 ( Mini-B) for data and video signal transfer to PC. |
Wind protection |
Up to 15m/s wind velocity |
Dimensions |
146(W) x 159(D) x 150(H) mm Including wind protector, monitor, and rubber protector Excluding rubber foot |
Weight |
2.5 kg, with ADC-18 AC adaptor 2.7 kg, with BTR-09 battery |
Electrode life |
3000 arc-discharges |
Standard Pakages:
Item |
Description |
Model No. |
Qty |
1 |
Fusion Splicer |
FSM-70S |
1 pc |
2 |
AC adaptor/battery charger |
ADC-18 |
1 pc |
3 |
AC power cord |
ACC-XX |
1 pc |
4 |
Spare Electrodes |
ELCT2-20A |
1 pair |
5 |
Cleaver |
CT-06 |
1 pc |
6 |
Battery Pack |
BTR-09 |
1 pc |
7 |
USB cable |
USB-01 |
1 pc |
8 |
Quick reference guide |
M-80S/19S-E |
1 pc |
9 |
Warning and cautions |
W-70-E |
1 pc |
10 |
Instruction Manual |
M-70 |
1 pc |
11 |
Alcohol Pot |
AP-01 |
1 pc |
12 |
Battery charge cord |
DCC-18 |
1 pc |
13 |
Carrying Case |
CC-30 |
1 pc |
14 |
Screw Driver |
SD-01 |
1pc |