| Category |
Description |
| Fiber alignment |
IPAAS core to core alignment(Image pattern analysis alignment system)
|
| Applicable type of fibers |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655), GI EDFA, EI980, Splicing available with different type fiber(SM/MM), ITU-T G.657
|
| Fiber count |
Single fiber
|
| Applicable fiber dimensions |
Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛
|
| Fiber setting and cleaved length |
250㎛: 8~16mm, 900㎛: 16mm(Application Holder: 8mm)
|
| Splicing modes |
Splice mode: 100, Heat mode: 50
|
| Typical Splice Loss |
SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB
|
| Return Loss |
> 60dB
|
| Splicing Time |
Typical 7sec
|
| Splice loss estimate |
Available
|
| Sleeve heating time |
28sec (Dual Sleeve Heating)
|
| Applicable protection sleeve |
40mm, 60mm(fiber), 28mm or 32mm(connector)
|
| Storage of splice result |
The last 10,000 results to be stored in the internal memory.
(Image 10,000 results)
|
| Tension test |
2N / 4.4N(Option)
|
| Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
|
| Storage condition |
Temperature: -40℃~80℃, Humidity: 0~95%
|
| Dimension |
142(W) ｘ163(L) ｘ146(H)mm(Including rubber)
|
| Weight |
2.0kg(Including battery 2.5kg)
|
| Viewing method and display |
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
|
| Fiber view and magnification |
X or Y view: 300X, X and Y view: 300X, 187X (Zoom 700X)
|
| Power supply |
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter
|
| No. of splice cycles with battery |
300cycle
|
| Electrode life |
More than 3,000 times
|
| Terminals |
USB, RCA, External Power(DC 12V Available for car cigar jack)
|
