buy japanese Sumitomo Electric T-55 Core Alignment Fusion Splicer Faster Splicing 6sec / Heating 20sec

Details

T-55 Automatic Adaptive Core Fusion Splicer

Fast, Capable, Practical
Fast Splicing 7 sec / Heating 20sec

Detachable Case
for Working Tray

Touch Screen Control Panel

Durable & Rugged

Specification

T-55 (Please contact us for more detailed specs)

Applicable optical fiber	Material	Silica Glass
	Profile type	Single Mode Fiber (SMF)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657
	Number of fiber	Single
	Cladding diameter	φ80 to φ150 μm *1
	Coating diameter	φ100 to φ1,000 μm
	Cleave length	5 to 16 mm (with coating clamp) 10mm (Drop cable / Indoor cable with fiber holder)
Applicable Cable23	0.25 mm primary coated 1-fiber drop cable	3.1mm or 2.6mm×2.0mm (excluding messenger steel wire)
Applicable Cable23	0.25 mm primary coated 1-fiber indoor cable	2.0mm×1.6mm
Splice Performance	Splice loss (typical)*4	SMF : 0.02 dB MMF: 0.01 dB DSF : 0.04 dB NZDSF : 0.04 dB
	Return loss (typical)	60dB or greater
	Screening load (typical)	1.96N - 2.09N (at stage)
	Splice time (typical)	Approx. 7 seconds (SM G652 Quick Mode) Approx. 9 seconds (Auto Mode)
	Automatic fiber identification	SMF / MMF / Other
	Splice & Heat cycles*5	Approx. 115 cycles (BU-11S)
	Fiber view & magnification	2 CMOS cameras observation, 200X (zoom : 525X) for X or Y single axis view, 88X for X & Y dual axis view
	Splice program	Maximum 300 splice programs can be selected and customized.
	Splice data storage	10,000 splices
	Splice image capture	200 splices
Fiber Alignment method	Adaptive Core	Aligns the left and right fibers by the center of their cores, or by the logical center of their cores in case of complicated core profiles.
	Diameter	Aligns the left and right fibers by their outer diameter.
	ATTN	“Attenuation”. Fibers are spliced by shifting the centers of the left and right fiber cores to achieve intentional high splice losses.
Heater Performance	The number of heaters	Single
	Sleeve length	Up to 60mm
	Protection sleeve *6	The protection sleeve for single fiber, up to 60mm length, up to φ5mm diameter. e.g. FPS-1 (single, 60mm, Cleave length 5-16mm) FPS-61-2.6 (thin, single, 60mm, Cleave length 5-16mm) FPS-40 (single, 40mm, Cleave length 5-10mm) FPS-40-2.6 (thin, single, 40mm, Cleave length 5-10mm)
	Heating time(typical) *7	Approx. 20 seconds (Slim 60mm 0.25 Mode)
	Program	Max. 100 settings
Physical Characteristics	Size (Main body) *8	120W×154D×130H(mm)
	Weight	Approx. 1.9 kg (With Battery pack BU-11S)
	Display size	4.1" touch screen color LCD display
	V-groove illumination	White LED
Power Conditions	Power consumption	Max. 110W
	AC operation	With AC adapter ADC-1430 series Input: AC 100-240V 50/60Hz 1.1A
	DC operation	Input: DC 10-15V, 7.5A
	Battery operation	(With BU-11S) 11.1V (2300mAh)
	DC output	12V For Sumitomo’s hot jacket remover
In - Out Terminal	Serial port	USB 2.0 mini-B type
In - Out Terminal	Storage media	SD / SDHC memory card
Environmental Conditions	Operating temperature	-10 to +50°C
	Storage temperature	-40 to +80°C
	Humidity	0 to 95%RH with no dew present
	Altitude	Up to 6,000 m
Environmental Durability*9	Shock resistance	Drop from 76cm on 5 faces (Excluding top face)
	Water resistance	Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.)
	Dust resistance	Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)

*1 Cladding diameters, except φ125μm, are applicable only for splicing in room temperature.
*2 Fiber holders appropriate for the fiber coating and fiber count are required.
*3 These fiber holders cannot be used with loose tube cable which optical fiber is free to move about in.
*4 Average value of the final inspection in room temperature with Sumitomo identical fiber. Measured by cut-back method relevant to ITU-T and IEC standards.
*5 Splice & Heat cycles may vary depending on the battery status and the operating environment.
*6 The 40mm protection sleeves can be used only if the cleave length is less than 10mm. Do not use the 40mm protection sleeves for fibers with more than φ250μm coatings.
*7 With Sumitomo protection sleeve FPS-61-2.6, Coating diameter φ250μm (in room temperature, powered with AC adapter, DC output port not in use)
*8 The projection parts are excluded.
*9 Confirms the battery operation in tests carried out by Sumitomo. Does not guarantee that the product is free of faults or damage.