You have no items in your shopping cart.
Details
TYPE-71M12 Mass fusion splicer up to 12c fibers
-Dual ovens for a faster splicing cycle
-Fully navigational touch screen interface
Compact & Reliable High speed splicer
- Ultra Fast splicing in approx. 14 s with (12-fiber ribbon) and fast heat shrinking of approx. 55 s (FPS-6 sleeves) with independent dual ovens (US patent 7,412,146)
- Fully navigational touchscreen and intuitive GUI for user friendliness
- Built in help videos play on the splicer display
- Shock, water and dust resistance for use in harsh environments
- Software updates and remote diagnosis via Internet
Specification
Applicable optical fiber | Material | Silica Glass |
---|---|---|
Profile type | Single Mode Fiber (SMF) Multi Mode Fiber (MMF) Dispersion Shifted Fiber (DSF) Non-Zero Dispersion Shifted Fiber (NZ-DSF) Bend Insensitive Fiber (BIF) |
|
Number of fiber *1 | 1c, 2c, 4c, 5c, 6c, 8c, 10c, 12c | |
Cladding diameter | φ125 μm | |
Coating diameter *2 | Single: 250 μm, 500 μm, 900 μm Ribbon fiber thickness: 280-400 μm |
|
Cleave length | 10mm | |
Applicable cable | 0.25mm primary coated 1-fiber drop cable | 3.1mm or 2.6mm×2.0mm (Excluding messenger steel wire) |
0.25mm primary coated 1-fiber indoor cable | 2.0mm×1.6mm | |
Physical Characteristics | Size (Main body) | 120W×154D×130H(mm) *3 (4.7W×6.0D×5.1H(inches)) |
Weight | Approx. 2.0 kg (With Battery pack BU-11) | |
Display size | 4.1" touch screen color LCD display | |
Power Conditions | Power consumption | Max. 80W |
AC operation | With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A |
|
DC operation | Input: DC 10-15V, 4.5A | |
Battery operation | (With BU-11) 11.1V (4600mAh) | |
DC output | 12V For Sumitomo’s hot jacket remover | |
In - Out Terminal | Serial port | USB 2.0 mini-B type |
Storage media | SD / SDHC memory card | |
Splice Performance at room temperature (25°C) | Splice loss (typical)*4 | SMF : 0.05 dB MMF: 0.02 dB DSF : 0.08 dB NZDSF : 0.08 dB |
Screening load (typical) | 1.96N - 2.09N (at stage) | |
Splice time (typical) | Approx. 14 seconds (SMF8-12c) Approx. 12 seconds (SMF4c) Approx. 9 seconds (SMF1c) |
|
Splice & Heat cycles | Approx. 110 cycles *5 | |
Splice program | Maximum 200 fusion programs can be selected and customized. | |
Splice data storage | 10,000 splices | |
Splice image capture | 64 splices | |
Heater Performance | The number of heaters | 2 built-in heaters are available |
Sleeve length | Up to 60mm | |
Protection sleeve Up to 60mm sleeve |
Fiber protection sleeve 60mm for single fiber (FPS-1, FPS-61-2.6) 40mm for ribbon up to 8c fiber (FPS-5) 40mm for ribbon up to 12c fiber (FPS-6, FPS-M12) Protection sleeve for Splice-on Connector Lynx2-MPO and Lynx2 CustomFitR Splice-On Connectors. |
|
Heating time(typical)*6 | Approx. 55 seconds. (40mm for 12c fiber) | |
Program | Max. 100 settings | |
Environmental Conditions and Power Conditions | Operating temperature | -10 to +50°C |
Storage temperature | -40 to +80°C | |
Humidity | 0 to 95%RH with no dew present | |
Altitude | Up to 3,660 m | |
Environmental Durability | Shock resistance*7 | Drop from 76cm on 5 faces (Excluding top face) |
Water resistance*7 | Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.) | |
Dust resistance*7 | Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below) |
*2 These fiber holders cannot be used with loose tube cable which optical fiber is free to move about in.
*3 The projection parts are excluded.
*4 With Sumitomo identical fibers (in room temprature). Measured by cut-back method relevant to ITU-T and IEC standards.
*5 Cycles per battery vary depending on the battery remaining capacity and operational environment.
*6 With Sumitomo protection sleeve in room temprature, powered with AC adapter.
*7 Confirms the battery operation in tests carried out by Sumitomo. Does not guarantee that the product is free of faults or damage.